Best Practices for Attaching Thermocouples to a PCB for Reflow Profiling Part II
As discussed in the previous blog of this series, it is important to remember the best practices for attaching thermocouples to a PCB to acc...
As discussed in the previous blog of this series, it is important to remember the best practices for attaching thermocouples to a PCB to acc...
We are back today to finish our conversation with Miloš Lazić to find out how he became interested in liquid metals....
Yesterday, in Part 2 of our interview, Miloš mentioned how using a hybrid solid/liquid TIM provides benefits over thermal grease. Today we disc...
In yesterday’s post, Miloš and I discussed what he’s been working on in the lab. Today we answer a question that impacts our TIM cu...
I recently caught up with Miloš, one of our Technical Support Engineers who has taken a special interest in liquid metals. In the lab, Milo&sca...
“Low melt alloys” is a term some people use to describe alloys that melt at temperatures lower than more traditional SnPb or SnAgCu alloys...
Dr. Ron introduces a new book to help electronics assembly process engineers to troubleshoot everyday assembly defects and challenges. ...
Have you had a chance to look at the new Indium Corporation web site? It has a brand new format and some new features that we think you will lik...
Backscattered Electrons and Secondary Electrons are used as two different detection methods in a Scanning Electron Microscope (SEM). Each detecion met...
With the summer internship season approaching, I can’t help but reflect back to the days when I was an intern for Indium Corporation....