Use an SMT Pre-Test Before Presenting a Soldering Workshop
Folks, Let’s see how Patty is doing, it’s been a very, very long time…….. Even though Patty and her husband Rob both worked ...
Folks, Let’s see how Patty is doing, it’s been a very, very long time…….. Even though Patty and her husband Rob both worked ...
If you are looking for the latest information on semiconductor burn-in and test materials, visit us at BiTS Expo 2018....
Indium Corporation is ready to help you Succeed at the Velocity of Technology at the APEX Expo 2018, booth 1625....
Jim Hisert, Indium Applications Manager, and Phil Zarrow take a look a liquid metal and its current and potential applications. ...
Visit Indium Corporation at APEX 2018 in San Diego, CA February 27th through March 1st....
Dr. Robert Ploessl, Manager of Marketing and Technology Assessment and Product Manager, Compounds, gives Phil Zarrow an overview of what Cpk and Cpu m...
Kim Flanagan, Technical Support Engineer, and Phil Zarrow discuss how to Avoid the Void® by looking at four non-QFN void types—Kirkendall (c...
Eric Bastow, Assistant Technical Manager, America’s Region, shares results of tests he’s conducted on the effect of reflow environments on...
Get off on the right foot when prescribing solder preforms....
Jim Hisert, Indium Applications Manager, and Phil Zarrow look at how two soft metals—gold and indium—form high-reliability, hard alloys us...
Researchers have released new data further explaining the limitations of indium addition in LEDs....
Eric Bastow and Phil Zarrow discuss surface insulation resistance (SIR)—the importance of non-conductive flux in no-clean commercial electronics...