Electrical, Thermal, and Mechanical Reliability of Electronics Assembly
This video is for people who are manufacturing increasingly, miniaturized assemblies and facing thermal, and/or mechanical drop shock challenges. It w...
This video is for people who are manufacturing increasingly, miniaturized assemblies and facing thermal, and/or mechanical drop shock challenges. It w...
This video is for people who are trying to select or develop the proper reflow profile. It will tell you the differences between the three main profil...
Patty, Rob, and Pete were headed to their regular monthly meeting where they, along with the Professor, discussed a book they were all reading....
Overall we believe that while the J-STD-004B standard may not be perfect and subject to future further evolution, it does provide the best available m...
Patty had just returned from SMTAI 2015. It was a sentimental meeting with the retirement of longtime executive administrator, JoAnn Stromberg ....
Folks, Let’s see how Patty, Rob and Pete are doing helping Mike Madigan establish his “Zero Defects” program….. “So let...
Generally in the world of solder, once a solder preform or section of wire is reflowed it has been consumed and there is not any need to consider what...
Dr. Ron Lasky, Senior Technology at Indium Corporation, explains how simple tweaks to day-to-day operations can drastically improve electron...
Phil Zarrow: Ron, we’ve discussed that performance of materials can affect productivity, and hence profitability. Can you give us an example? ...
Just 1% more productivity in a factory line can equate to 3% more profitability. Dr. Ron Lasky, Senior Technologist at Indium Corporation, explains to...
Flux-coated preforms allow you to reduce the amount of flux that’s presented to the joint and increase the solder volume. SMT expert Phil ...