Understanding Epoxy Flux in SMT: The Need and the Process
Over the next few months I will continue to break down and discuss Epoxy Flux and the manufacturing process details in the series: Understanding Ep...
Over the next few months I will continue to break down and discuss Epoxy Flux and the manufacturing process details in the series: Understanding Ep...
As we discussed in part I of this three-part series, uneven solder bondline thickness between the substrate and baseplate of an IGBT module can cause ...
SMTA International 2015 is just around the corner. If you want to see what our engineers will be presenting at the show check out this blog; there is ...
Folks, It is hard to imagine, but it has been just a little short of 13 years ago that Jim Hall, Phil Zarrow and I approached SMTA’s JoAnn Strom...
As summer comes to an end, we are reluctantly saying “Goodbye” (for now) to our latest group of interns. At Indium we have fully embraced ...
Often times people assume that the dipping process is easy… it is once you have taken the time up-front to optimize the process. The opti...
I have recieved a number of inquiries over the years regarding Pack-on-Package (PoP) Manufacturing Processes. One of the most frequent questions ...
Folks, I ran into good friend Phil Zarrow the other day. Phil, Jim Hall, and I developed the SMTA Certification Prog...
Folks, it has been a while. Let’s look in on Patty…. Patty stared at her new Apple® Watch and was pleased. What was most pleasi...
The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe and Liam Mills of TT Electroni...
The Indium Corporation has many summer interns this year. The technical support group was fortunate enough to hire Sarah Bjornland (pictured). She is ...
Most of our customers use whatever heating method they already have, unless they are starting from scratch or unless there is a reason their existing ...