Fluxers Part IV - Brush: Wave Soldering (A Segmented Synopsis) Post #8
My last two posts (1) (2) have been about the different facets of spray fluxing and the systems......
Fluxers
Fluxers Part III B - Spray Fluxer Venting: Wave Soldering (A Segmented Synopsis) Post #7
No matter how accurate the spray fluxer is there will at least be some flux that is not deposited on the board that needs to be removed from the syste...
Fluxers Part III A - The Total Loss System and Spray Fluxing: Wave Soldering (A Segmented Synopsis) Post #6
The total loss system is a method of applying spray flux that utilizes the minimal amount of material to properly create a satisfactory solder joint. ...
Fluxers Part III - Spray: Wave Soldering (A Segmented Synopsis) Post #5
Spray Fluxing is the most common way to flux a printed circuit board today. When spray fluxers were first developed they were clumsy, inefficient......
Fluxers Part II - Wave: Wave Soldering (A Segmented Synopsis) Post #4
When the wave soldering machine was developed, the early flux application method was the same as the solder application method – a wave. While t...