Metal Loading: Powder Size for Printing and Dispensing
At Indium Corporation, we get a lot of questions about solder paste - its composition, its application, and best practice advice. Many of those q...
Printing
Electronics Assembly: An Introduction to Particle Size and Printing Smaller Area Ratios
This video is for anyone interested in the role of solder paste particle size with regard to reflow and printing. Keywords: Phil Zarrow, Ed Briggs, eb...
Materials Lifetimes - A Modest Proposal
Specific and consistent terminologies are required to enable accurate and effective discussions of soldering materials....
A 10 Sigma Solder Paste Printing Process?
Folks, Let’s check in on Patty as she is about to wrestle with claims of a 10 Sigma Solder Paste Printing Process involving the world’s sm...
Viscosity And The Printable Nature of Solder Paste
Let’s talk viscosity. Most of us are experienced with paint. Paint is a thick liquid that is applied to a surface and then, for the most p...
Printer Process Set-up
Over the last few years, miniaturization, and the drive for increased yields and lower defect rates, have forced the electronics manufacturing industr...